Maintenance and Care Tips for Your Smok Pen Starter Kit
The Smok Pen is a new type of pen that allows you to write in some recoverable format that is heated right before you write. It’s the sort of device that some students want to have, as it eliminates the need for them to carry a complete tube of special writing ink. You simply fill the reservoir with the standard ink and place your pen in the machine and write on any smooth surface that you want.
The Smok pen consists of two major components: the pen body, that is of course where you hold it in place, and the Smok Valve which serve because the connector for the USB charging port. Both parts are encased in a metal and plastic tube known as the Smok Valve, which is opened with a valve control found at vapinger underneath of the pen. One end of the tube results in the cigarette lighter socket as the other leads to the USB charging port. On leading side of the Smok Valve you will find a dome with a lip that holds the heating element.
Once the pen is charged, it is heated up by the USB power port and begins to create heat. This heat melts the glue which holds the Smok Valve together, causing it to expand until it leaks out onto the paper or anything you are writing on. Once the ink is successfully charged, the Smok Valve automatically closes, leaving you with a completely functional pen. The surface of the pen includes a transparent dome with a lip around it. Both edges of the dome have a metallic texture in their mind, which when heated causes the ink to spread right into a fine powder that may easily be sucked in to the writing medium.
When you initially remove your Smok Pen, you will observe that it looks just like any other pen. It has a fine point that wont smudge or bleed while you are writing on paper. In addition, it includes a beautiful metallic shine to it, gives the device a futuristic look. However, this does not mean that the device cannot be used in an ordinary manner, as there are a number of different ways in which you can still benefit from the great features of the pen.
A proven way is to heat the unit using your hand, which is how most people enjoy their pens. If you are using the device in this fashion, you need to make certain you usually do not touch the heating coil heads directly. Instead, you need to warm the entire pen to bring out their warmth. It is very important remove the battery prior to this task, as some manufacturers specify a particular temperature to activate the coil heads. There are many different e-liquids in the marketplace that can help you achieve this heat change efficiently, ensuring that you never run into problems while warming the pen.
You might find that after heating up the device that it generally does not work correctly. This normally implies that you’re either holding the pen incorrectly, are pressing the heating coil too much, or are holding the device at a position which is not conducive to warming. If this is actually the case, then you will need to take away the batteries and put the device back together again. It is strongly recommended that you do this each and every time you start enjoying your Smok Pen starter kit – if you wish to keep the device for longer than this then you can simply repeat the process until you have everything sorted.
When testing your starter kit to make certain everything is working correctly, you will need to check out the connections to the tank and the coil head. Ideally, the connections on the tank should be securely tightened – if they are loose then they should be tightened to the manufacturer’s specifications. If you feel that this has not been done correctly, then it might be worthwhile getting the entire tank re-tightened by way of a professional as many devices like these are manufactured to an extremely high standard. If this isn’t the case, then your only way to ensure that everything is working properly would be to have the entire tank re-tied.
The next phase in the battery care process is to charge your show pen. This may usually be achieved through the USB port of one’s computer. Once charged, the device ought to be ready for use. After you have completed this step, you should leave the device plugged into a power supply. You need to check regularly that the coils are charged up, and then you should leave the device to charge for the recommended time frame – typically around 5 hours.